By using the Wireless M-Bus transmission protocol, the solution allows to send the data acquired by those meters that don’t allow the installation of the integrated radio module solution.
The module can be connected to any meter equipped with pulse output, of any brand, size and version.
The configuration and the reading of the radio signal is performed with the RFM-RX2 receiver connected to a PC.
|TRANSMISSION PROTOCOL||W-Mbus EN13757-4 @868 MHz ≤ 10 mW|
|SIGNAL COVERAGE||300 meters**|
|SUPPORTED ELEMENTS||water, heat/cool, electric energy, gas|
|POWER SUPPLY||3.6V Lithium battery|
|BATTERY LIFE||>10 years*|
|SIZE AND WEIGHT||30 x 67 x 67 mm 43 g|
|CONFIGURATION||Wireless using RFM-RX2 and dedicated software|
|WORKING TEMPERATURE||from +1°C to +55°C|
|TRANSMITTED DATA||Total measures volume (consumption), historical values, battery status, alarms.|
|PULSE INPUTS||N°2 inputs. Connectable to REED pulse emitter systems and Open Collector type|
* Battery life depends on the number of associated devices and the environmental conditions ** Under ideal signal propagation conditions
WEIGHT AND DIMENSION
Example of connection to multi jet and woltmann water meters